Superior Exterior Emulsion.
Aura Exterior emulsion with smooth matt is a durable, water repellent, UV resistant, fungus/ algae/ bacteria resistant, with very good coverage ideally suited for exterior surfaces.
Resistance to weathering (UV, Fungus, Water etc.) and blistering, low VOC, high coverage area with desirable ease of application, high coverage, very cost effective etc.
Water base Exterior Primer
4 bases (white, light, medium, dark ) for the interior paint isavailable. The base material may be tinted with universal colorants to a full range of customcolors.
60-70 square feet per liter for 2 coats depends on the porosity of the substrate.
Not recommended for floors or decks.
Interior plaster, drywall, concrete and masonry surfaces. This paint can also beapplied on hardboard siding, gypsum board.
Surface must be clean, dry, and free of wax, grease, oil, loose or peeling paint, and other foreign materials. Cracks and other holes should be repaired with suitable crackfillers for best results. On new drywall, use of one coat of primer on wall putty & 2 coats finish is recommended.
Conditions listed above should be strictly followed. Previously painted,glossy surfaces should be lightly sanded. All primers should be allowed to dry thoroughly before application of finish coats. Chalky surfaces should be thoroughly washed.
For best results, ambient temperature is preferred. Frost, fog, ordamp conditions should be avoided.
Paints should be stirred well before use. Use of roller or brush for applicationof paint is recommended. Application of only one coat primer & two coats finish is advisable.
Thinning is required for brush/rollerapplication. Use only clean water and approximately 400-500 ml of water per lit.
Surface dries naturally dust free in 4 hours. Recoat should be applied onlyafter 4 hours. Drying time may vary depending on temperature and humidity.
Application equipment should be cleaned with soap and water.
Paint should be store in a cool & dry place.
20 Lit, 10 Lit, 4 Lit, 1 Lit
|TYPE||SUPERIOR Exterior Emulsion|
|Viscosity||106 KV at 25oC|
|Sp. Gravity||1.2-1.25 at 25oC|
|Method of application||Brush/Roller|
|Application temperature||Room temperature|
|Coverage Area||60-70sqft/liter/2 coat|
|Drying Time Surface Dry||4 hrs|
|Minimum recoat time||4 hrs|
|UV Stability||300 hrs+|
|Alkali Resistance a)NH4OH vapour b)10% NaOH solution||Passed IS+ Passed IS+|