Waterproof Exterior Emulsion
Ultra Guard Waterproof Emulsion is a 100% acrylic, anti fungal, anti algae, glossy emulsion with very high waterproofing properties. This is a highly durable, water repellent, UV resistant, fungus/ algae/ bacteria resistant, thermally insulating,elastomeric, anti-sticking, and hence can be used as finish for a wide variety of exterior and interior surfaces. It provides a glossy, decorative finish to the surface.
Outstanding adhesion – by virtue of which it gets embedded in the surface (not afilm like), high resistance to weathering (UV, Fungus, water etc.) and blistering, low VOC, highcoverage area with desirable ease of application characterize the product. Additional featuresinclude its elastomeric (stretchable paint that cover cracks) and anti-sticking abilities. Itproduces an all season and breathable type finish. It provides robust performance due toinorganic, structurally defect-free particles, incorporated in the paint matrix.
Water base Elastomeric Waterproof Emulsion
4 bases (white, light, medium, dark) are available. The base material may be tinted with universal colorants to a full range of custom colours.
70-80 square feet per liter for 2 coats depends on the porosity of thesubstrate.
Not recommended for floors or decks.
Apart from exterior plaster, drywall, concrete and masonry this emulsion can also be effectively applied on exterior hardboard siding, gypsum board, concrete, and masonrysurfaces.
Surface must be clean, dry, and free of wax, grease, oil, loose or peeling paint, and other foreign materials. Cracks and other holes should be repaired with suitable crackfillers for best results. On new drywall, use of one coat of primer on wall putty & 2 coats finish is recommended.
Conditions listed above should be strictly followed. Previously painted,glossy surfaces should be lightly sanded. All primers should be allowed to dry thoroughly before application of finish coats. Chalky surfaces should be thoroughly washed.
For best results, ambient temperature is preferred. Frost, fog, or damp conditions should be avoided.
Emulsion should be stirred well before use. Use of roller or brush for application of emulsion is recommended.
Formulated for use at package consistency. Thinning can be done if required with clean water with a maximum of 300ml per 1lit.
Surface dries naturally dust free in 4 hours. Recoat should be applied only after 4 hours. Drying time may vary depending on temperature and humidity.
|TYPE||Elastomeric Waterproof Emulsion|
|Thinning Ratio||No thinning|
|Viscosity||77KV at 25oC|
|Sp. Gravity||1.10 at 25oC|
|Method of application||Brush/Roller|
|Application temperature||Room temperature|
|Coverage Area||70-80sq ft/liter/2coats|
|Drying Time Surface Dry||4 hrs|
|Minimum recoat time||4 hrs|
|UV Stability||300 hrs+|
|Alkali Resistance a)NH4OH vapour b)10% NaOH solution||Passed IS+ Passed IS+|
Application equipment should be cleaned with soap and water.
Paint should be store in a cool & dry place.
20 Lit, 10 Lit, 4 Lit, 1 Lit