Alkali Resistant Anti-efflourescent Interior Primer .
Water based acrylic interior primer of finest quality is a durable, water repellent, fungus/ algae/ bacteria resistant, and hence can be used as an undercoat for a wide variety of interior surfaces.
Outstanding adhesion due to very high surface area of fine acrylic materials –by virtue of which it gets embedded in the surface (not a film like), high resistance to weathering (UV,Fungus, water etc.) and blistering, low VOC, high coverage area with desirable ease of application characterize this product.
Water base Interior Primer
120-160 square feet per liter per coat depends on the porosity of thesubstrate.
Not recommended for floors or decks.
Interior plaster, drywall, concrete and masonry surfaces.
Surface must be clean, dry, and free of wax, grease, oil, loose or peeling paint, and other foreign materials. Cracks and other holes should be repaired with suitable crack fillers for best results. On new drywall, use of one coat of primer on wall putty & 2 coats finish is recommended.
Conditions listed above should be strictly followed. Previously painted,glossy surfaces should be lightly sanded. All primers should be allowed to dry thoroughly before application of finish coats. Chalky surfaces should be thoroughly washed.
For best results, ambient temperature is preferred. Frost, fog, ordamp conditions should be avoided.
Paints should be stirred well before use. Use of roller or brush for applicationof paint is recommended. Application of only one coat primer & two coats finish is advisable.
Thinning is required for brush/rollerapplication. Use only clean water and approximately 400-500 ml of water per lit.
Surface dries naturally dust free in 4 hours. Recoat should be applied onlyafter 4 hours. Drying time may vary depending on temperature and humidity.
Application equipment should be cleaned with soap and water.
Paint should be store in a cool & dry place.
20 Lit, 10 Lit, 4 Lit, 1 Lit
|Viscosity||106 KV at 25oC|
|Sp. Gravity||1.25 at 25oC|
|Method of application||Brush/Roller|
|Application temperature||Room temperature|
|Coverage Area||90-110sqft/liter/2 coat|
|Drying Time Surface Dry||4 hrs|
|Minimum recoat time||4 hrs|
|UV Stability||300 hrs+|
|Alkali Resistance a)NH4OH vapour b)10% NaOH solution||Passed IS+ Passed IS+|