IZONIL is a Waterproof and Breathable Plaster which provides plastering and waterproofing in one step. It is extremely waterproof against water pressure under permanent load which contains MB Component – an innovative hydrophobic compound. It offers you a long term resolution against any kind of water leakage. It is the most revolutionary research resulted in maintaining products for the lasting protection especially at a time of environmental concern. IZONIL Coatings are robust, environment friendly, long lasting, offers high resistance to impact/abrasion, has high water repellency, and offers very high UV protection. Izonil waterproof plaster is a high quality cement based, fiber reinforced product that provides a totally waterproof barrier, without the need for a membrane. Applied directly to the walls or floors, it prevents ingress of water from either side of the plaster while remaining air permeable allowing trapped moisture to escape.
Thoroughly clean the surface with water to completely remove dust, moss, grease or any undue residues from the surface
To maximize cohesion a thin layer mixture of cement and water should be spattered onto the surface before plastering. In case of water leakage, it is important to ensure that the leakage is stopped for atleast 72 hours or more if possible, to ensure the proper setting of the plaster. Prepration is made in gravity mixer or manual stirrer by adding 4-6 lit of water into 25kg bag. Mix or stir for 5-10mnts. Apply one layer of IZONIL plaster by putty blade or trowel with a minimum thickness of 5-10mm per layer. Mixed material must be worked up within 3hrs. After drying slightly moisten for 4-5 days by spraying water. There are different types of Izonil to be used in Different areas. Choose the best option after identifying your requirement.